Release Notes

2021 | wlan edca-parameters-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
wlan edca-parameters-profile
wlan
wlan edca-parameters-profile {ap|station} <profile-name>
{background | best-effort | video | voice}
[acm][aifsn <number>] [ecw-max <exponent> [ecw-min <exponent>] [txop <number>]
[clone <profile-name>
Description
This command configures an enhanced distributed channel access (EDCA) profile for APs or for clients
(stations).
Syntax
Parameter Description Range Default
<profile-name>
Name of this instance of the profile. The name must be 1-
63 characters.
— “default”
background
Configures the background queue. — —
best-effort
Configures the best-effort queue. — —
video
Configures the video queue. — —
voice
Configures the voice queue. — —
acm
Specifies mandatory admission control. The client reserves
the access category through traffic specification (TSPEC)
signaling. Enter 1 to enable, 0 to disable.
0, 1 0 (disabled)
aifsn
Arbitrary inter-frame space number. 1-15 0
ecw-max
The exponential (n) value of the maximum contention
window size, as expressed by 2
n
-1. A value of 4 computes
to 2
4
-1 = 15.
1-15 0
ecw-min
The exponential (n) value of the minimum contention
window size, as expressed by 2
n
-1. A value of 4 computes
to 2
4
-1 = 15.
0-15 0
txop
Transmission opportunity, in units of 32 microseconds.
Divide the desired transmission duration by 32 to
determine the value to configure. For example, for a
transmission duration of 3008 microseconds, enter 94
(3008/32).
0-2047 0
clone
Name of an existing EDCA profile from which parameter
values are copied.
— —
Usage Guidelines
EDCA profiles are specific either to APs or clients. You apply an EDCA profile to a specific SSID profile. use this
command only under the guidance of your Dell technical support representative.
The following are the default values configured for APs: