Release Notes

Parameter Description
internet
If you issue the internet parameter, the AP sends an Information
Element (IE) indicating that the network allows internet access. By
default, a hotspot profile does not advertise network internet access.
no
Negates or removes any configured parameter.
p2p-cross-connect
Issue this command to advertise support for P2P Cross Connections.
This setting is disabled by default.
p2p-dev-mgmt
Issue this command to advertise support for P2P device management.
This setting is disabled by default.
pame-bi
This option enables the Pre-Association Message Exchange BSSID
Independent (PAME-BI) bit, which is used by an AP to indicate whether
the AP indicates that the Advertisement Server can return a query
response that is independent of the BSSID used for the GAS Frame
exchange.
query-response-length-limit
<query-response-length-limit>
Generic Advertisement Service (GAS) enables advertisement services
that lets clients query multiple 802.11 neworks at once, while also
allowing the client to learn more about a network’s 802.11
infrastructure before associating.
If a client transmits a GAS Query using a GAS Initial Request frame,
the responding AP will provide the query response (or information on
how to receive the query response) in a GAS Initial Response frame.
This parameter sets the maximum length of the GAS query response,
in octets. The supported range is 1-255 octets.
radius_cui
Include this parameter to enable the Chargeable-User-Identity RADIUS
attribute defined by RFC 4372. Home networks can use this attribute to
identify a user for the roaming transactions that take place outside of
that home network.
radius_loc_data
Include this parameter to enable the Location Data RADIUS attribute
defined by RFC 5580. Enabling this parameter allows the RADIUS
server to use location data.
roam-cons-len-1
Length of the OI. The value of the roam-cons-len-1 parameter is
based upon the number of octets of the roam-cons-oi-1 field.
l 0: Zero Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)
roam-cons-len-2
Length of the OI. The value of the roam-cons-len-2 parameter is
based upon the number of octets of the roam-cons-oi-2 field.
l 0: Zero Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)
roam-cons-len-3
Length of the OI. The value of the roam-cons-len-3 parameter is
based upon the number of octets of the roam-cons-oi-3 field.
l 0: Zero Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)
roam-cons-oi-1
Roaming consortium OI assigned to one of the service provider’s top
three roaming partners. This additional OI will only be sent to a client
if the addtl-roam-cons-ois parameter is set to 1 or higher.
NOTE: The service provider’s own roaming consortium OI is
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide wlan hotspot hs2-profile | 2056