Release Notes

Description Range Default
Push-To-Talk feature for Polycom
SpectraLink devices.
clone
Name of an existing SSID profile from
which parameter values are copied.
— —
deny-bcast
When a client sends a broadcast probe
request frame to search for all available
SSIDs, this option controls whether or
not the system responds for this SSID.
When enabled, no response is sent and
clients have to know the SSID in order to
associate to the SSID. When disabled, a
probe response frame is sent for this
SSID.
— disabled
disable-probe-retry
Enable or disable battery MAC level
retries for probe response frames. By
default this parameter is enabled, which
mean that MAC level retries for probe
response frames is disabled.
Enabled
dot11r-profile
Associates the dot11r-profile with the
SSID profile.
— —
dtim-period
Specifies the interval, in milliseconds,
between the sending of Delivery Traffic
Indication Messages (DTIMs) in the
beacon. This is the maximum number of
beacon cycles before unacknowledged
network broadcasts are flushed. When
using wireless clients that employ power
management features to sleep, the
client must revive at least once during
the DTIM period to receive broadcasts.
1
eapol-rate-opt
Use a more conservative rate for more
reliable delivery of EAPOL frames.
— enabled
edca-parameters
-profile
Name of the enhanced distributed
channel access (EDCA) profile that
applies to this SSID.
NOTE: This parameter requires the
PEFNG license. Configure this
parameter only under the guidance of
your Dell representative.
— —
ap|sta
Assigns the specified EDCA profile to AP
or station (client).
— —
enforce-user-vlan
Strict enforcement of data traffic only in
user's assigned vlan (Open stations
only).
— —
essid
Name that uniquely identifies a wireless
network. The ESSID can be up to 31
characters. If the ESSID includes spaces,
you must enclose it in quotation marks.
— aruba-ap
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide wlan ssid-profile | 2072