Release Notes

ap-name
ap-name <name>
ap-system-profile <profile>
authorization-profile <profile>
clone <profile>
dot11a-radio-profile <profile>
dot11a-traffic-mgmt-profile <profile>
dot11g-radio-profile <profile>
dot11g-traffic-mgmt-profile <profile>
enet0-profile <profile>
enet1-profile <profile>
event-thresholds-profile <profile>
exclude-mesh-cluster-profile-ap <profile>
exclude-virtual-ap <profile>
ids-profile <profile>
mesh-cluster-profile <profile> priority <priority>
mesh-radio-profile <profile>
no ...
regulatory-domain-profile <profile>
rf-optimization-profile <profile>
snmp-profile <profile>
virtual-ap <profile>
voip-cac-profile <profile>
Description
This command configures a specific AP.
Syntax
Parameter Description Default
<name>
Name that identifies the AP. By default, an AP’s name
can either be the AP’s Ethernet MAC address, or if the
AP has been previously provisioned with an earlier
version of ArubaOS, a name in the format
<building>.<floor>.<location>. The name must be 1-63
characters.
NOTE: You cannot use quotes (“) in the AP
name.
—
ap-system-profile
Configures AP administrative operations, such as
logging levels. See ap system-profile on page 192.
“default”
authorization-profile
Restrictive group for unauthorized AP. —
clone
Name of an existing AP name from which profile
names are copied.
—
dot11a-radio-profile
Configures 802.11a radio settings for the AP group;
contains the ARM profile. See rf dot11a-radio-profile
on page 664.
“default”
dot11a-traffic-mgmt-profile
Configures bandwidth allocation. See wlan traffic-
management-profile on page 2079.
—
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide ap-name | 218