Release Notes

Parameter Description Range Default
user-vlan-in-redirection-url <ipaddr>
Add the user VLAN in
the redirection URL.
This parameter
requires the Public
Access license.
enabled
disabled
disabled
user-vlan-redirection-url
Sends the user’s VLAN
ID in the redirection
URL when external
captive portal servers
are used.
— —
welcome-page <url>
URL of the page that
appears after logon
and before redirection
to the web URL. This
can be set to any URL.
— /auth/welcome.html
white-list <white-list>
Name of an existing
white list on an IPv4 or
IPv6 network
destination. The white
list contains
authenticated
websites that a guest
can access. If you
have not yet defined a
netdestination, use
the CLI command
netdestination to
define a destination
host or subnet before
you add it to the
whitelist
— —
Usage Guidelines
You can configure the Captive Portal authentication profile in the base operating system or with the Next
Generation Policy Enforcement Firewall (PEFNG) license installed. When you configure the profile in the base
operating system, the name of the profile must be entered for the initial role in the AAA profile. Also, when you
configure the profile in the base operating system, you cannot define the default-role.
Example
The following example configures a Captive Portal authentication profile that authenticates users against the
controller’s internal database. Users who are successfully authenticated are assigned the auth-guest role.
To create the auth-guest user role shown in this example, the PEFNG license must be installed in the controller.
aaa authentication captive-portal guestnet
default-role auth-guest
user-logon
no guest-logon
server-group internal
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide aaa authentication captive-portal | 25