Release Notes

269 | cp-bandwidth-contract Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
cp-bandwidth-contract
cp-bandwidth-contract <name> {mbits <1..2000>}|{kbits <256..2000000>}
Description
This command configures a bandwidth contract traffic rate which can then be associated with a whitelist
session ACL.
Syntax
Parameter Description
<name>
Name of a bandwidth contract.
mbits <1..2000>
Set a bandwidth rate inn mbits/seconds.
kbits <256..2000000>
Set a bandwidth rate in kbits/seconds.
Example
The following example configures a bandwidth contract named “cp-rate” with a rate of 10,000Kbps.
(host)(config) #cp-bandwidth-contract cp-rate kbits 10000
Related Commands
Command Description Mode
show cp-bwcontracts
Display a list of Control Processor (CP) bandwidth
contracts for whitelist ACLs.
Enable or Config modes
firewall cp
This command creates a new whitelist ACL and
can associate a bandwidth contract with that ACL.
Enable or Config modes
Command History
This command was introduced in ArubaOS 3.4
Command Information
Platforms Licensing Command Mode
All platforms This command requires the PEFNG
license.
Config mode on master controllers