Release Notes
331 | esi server Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
esi server
esiserver<name>
[dport<tcp-udp-port>]|
[mode{bridge|nat|route}]|
[no]|
[trusted-ip-addr<ip-addr>[health-check]]|
[trusted-port<slot/port>]|
[untrusted-ip-port<ip-addr>[health-check]]|
[untrusted-port<slot/port>]
Description
This command configures an ESI server.
Syntax
Parameter Description
dport
Specifies the NAT destination TCP/UDP port.
mode
Specifies the ESI server mode of operation: bridge, nat, or route
no
Negates any configured parameter.
trusted-ip-addr
Specifies the server IP address on the trusted network. As an option, you can also
enable a health check on the specified address
trusted-port
Specifies the port connected to the trusted side of the ESI server; slot/port format.
untrusted-ip-addr
Specifies the server IP address on the untrusted network. As an option, you can also
enable a health check on the specified address
untrusted-port
Specifies the port connected to the untrusted side of the ESI server.
Usage Guidelines
Use the showesiserver command to show ESI server information.
Example
The following command specifies the ESI server attributes.
(host) (config) #esiserverforti_1
moderoute
trusted-ip-addr10.168.172.3
untrusted-ip-addr10.168.171.3
Command History
Introduced in ArubaOS 2.5.