Release Notes

ids ap-classification-rule change
id-classification-rule <rule-name>
check-min-discovered-aps
classify-to-type [neighbor | suspected-rogue]
clone
conf-level-incr
discovered-ap-cnt <discovered-ap-cnt>
match-ssids
no
snr-max <value>
snr-min <value>
ssid <ssid>
Description
Configure the AP classification rule profile.
Syntax
Parameter Description Range Default
<rule-name>
Enter the AP classification rule profile
name.
— —
check-min-discovered-aps
Have the rule check for the minimum
number of APs
true
false
true
classify-to-type
[neighbor | suspected-rogue]
Specify if the type the AP will be
classified, neighbor or suspected-rogue,
if the rule is matched.
— suspected-
rogue
clone
Copy data from another AP classification
rule profile
— —
conf-level-incr
Increase the confidence level (in
percentage) when the rule matches
0-100 5
discovered-ap-cnt
<discovered-ap-cnt>
Enter the keyword discovered-ap-cnt
followed by the number of APs to be
discovered.
0-100 0
match-ssids
Match SSIDs; match or do not match true
false
false
no
Negates any configured parameter — —
snr-max <value>
Use the maximum SNR value 0-100 0
snr-min <value>
Use the minimum SNR value 0-100 0
ssid <ssid>
Enter the keyword ssid followed by the
SSID string to be matched or excluded
— —
Usage Guidelines
AP classification rule configuration is performed only on a master controller. If AMP is enabled via the mobility-
manager command, then processing of the AP classification rules is disabled on the master controller. A rule is
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide ids ap-classification-rule change | 362