Release Notes

483 | ipv6 dhcp excluded-address Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
ipv6 dhcp excluded-address
ipv6 dhcp excluded-address <low-address> [<high-address>]
Description
This command configures an excluded IPv6 address range for the DHCPv6 server on the controller.
Syntax
Parameter Description
<low-ipaddr>
Low end of range of IPv6 addresses. For example, you can enter an IPv6 address that
should not be assigned.
<high-ipaddr>
High end of the range of IPv6 addresses.
Usage Guidelines
Use this command to specifically exclude certain IPv6 addresses from being assigned by the DHCPv6
server.Ensure that the statically assigned IPv6 addresses are excluded.
Example
The following command configures an excluded IPv6 address range:
(host) (config-dhcpv6)#ipv6 dhcp excluded-address 2002:570:20::2 2002:570:20::25
Command History
Introduced in ArubaOS 6.2
Command Information
Platform License Command Mode
Available on all platforms Available in base operating system Config mode on master
controllers