Release Notes

501 | lcd-menu Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
lcd-menu
lcd-menu
[no] disable menu [maintenance [factory-default| media-eject| qui-quick-setup | media-eject
| system-halt | system-reboot | upgrade-image [parition0 | partition1]| upload-config]]
Description
This command allows you to enable or disable the LCDmenu either completely or for specific operations.
Syntax
Parameter Description
Default
lcd-menu
Enters the LCD menu configuration mode.
no
Delete the specified LCDmenu option.
disable
Disables (or enables) the complete LCD menu.
maintenance
Disables (or enables) the maintenance LCD menu. Enabled
factory-default
Disables (or enables) the return to factory default option in the LCD
menu.
Enabled
media-eject
Disables (or enables) the media eject option in the LCD menu. Enabled
system-halt
Disables (or enables) the system halt option in the LCD menu. Enabled
system-reboot
Disables (or enables) the system reboot in the LCD menu. Enabled
upgrade-image
Disables (or enables) the upgrade image option in the LCD menu. Enabled
partition 0
partition 1
Disables (or enables) image upgrade on the specified partition (0 or
1).
Enabled
upload-config
Disables (or enables) the upload config option in the LCDmenu. Enabled
Usage Guidelines
You can use this command to disable executing the maintenance operations using the LCD menu. You can use
the no form of these commands to enable the specific LCD menu. For example, the following commands
enable system halt and system reboot options:
(host) (config) #lcd-menu
(host) (lcd-menu) #no disable menu maintenance system-halt
(host) (lcd-menu) #no disable menu maintenance system-reboot
You can use the following show command to display the current LCD settings:
(host)#show lcd-menu
lcd-menu
--------
Menu Value
---- -----
menu maintenance upgrade-image partition0 enabled
menu maintenance upgrade-image partition1 enabled
menu maintenance system-reboot reboot-stack enabled
menu maintenance system-reboot reboot-local enabled