Release Notes

mgmt-server profile
wlan
mgmt-server profile <profile-name>
clone
airgroupinfo-enable
location-enable
misc-enable
monitored-info-enable
monitored-stats-enable
no
sessions-enable
stats-enable
tag-enable
uccmonitoring-enable
voiceinfo-enable
Description
Configure a management server profile on the controller for an AirWave management server or for an Analytics
Location Engine (ALE) that should receive Advanced Monitoring (AMON) protocol messages filtered based on
the profile settings. The default profiles provided for the AMPserver (default-amp) and ALE (default-ale) are
editable using this command.
Syntax
Parameter Description
<profile-name>
Associate the controller to an AirWave management server by entering
the IP address of the AirWaveserver.
clone
Use this command to copy from another configuration profile.
airgroup-enable
If enabled, the messages related to the AirGroup feature will be sent to
the management server.
location-enable
If enabled, Station RSSI/AP Neighbor messages will be sent to the man-
agement server.
misc-enable
If enabled, the AP system statistics, specifications, and station steer
information will be sent to the management server.
monitored-info-enable
If enabled, the monitored AP or station information will be sent to the man-
agement server.
monitored-stats-enable
If enabled, the monitored AP or station statistics will be sent to the man-
agement server.
no
Disables the specified message filter.
sessions-enable
If enabled, the firewall DNA, application, and aggregate session mes-
sages will be sent to the management server.
stats-enable
If enabled, the statistics for Radio, virtual APs, and clients will be sent to
the management server.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide mgmt-server profile | 558