Release Notes

mgmt-server type
wlan
mgmt-server type
ale primary-server <ip-addr> profile <profile-name>
amp primary-server <ip-addr> profile <profile-name>
Description
Register a management server with the controller by specifying the IP address of an AirWave management
server or Analytics and Location Engine that should receive messages from the controller using the Advanced
Monitoring (AMON) protocol. You must also specify the management configuration profile in which the AMON
message filtering settings can be done.
Syntax
Parameter Description
ale primary-server
<ip-addr> profile <profile>
Associate the controller to analytics and location engine by entering the
IP address of the location server and the management configuration pro-
file.
amp primary-server
<ip-addr> profile <profile>
Associate the controller to an AirWave management server by entering
the IP address of the AirWaveserver and the management configuration
profile.
Example
The following command defines a primary AirWaveManagement server.
(host) (config) #mgmt-server type amp primary-server 192.168.6.2 profile default-amp
Command History
Modification
ArubaOS 3.4 Command introduced.
ArubaOS 6.1 The secondary-server parameter was deprecated.
ArubaOS 6.3 The xc parameter was introduced.
ArubaOS 6.3.1 The xc parameter was changed to ale and a new profile parameter was
introduced.
Command Information
Platforms Licensing Command Mode
All platforms Config mode on master controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide mgmt-server type | 560