Release Notes

695 | router mobile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
router mobile
router mobile
Description
This command enables Layer-3 (IP) mobility.
Syntax
No parameters.
Usage Guidelines
Use this command to enable IP mobility on a controller. IP mobility is disabled by default on the controller. This
command must be executed on all controllers(master and local) that need to provide support for layer-3
roaming in a mobility domain. You can enable or disable IP mobility on a virtual AP profile with the wlan
virtual-ap command (IP mobility is enabled by default in a virtual AP profile).
It is recommended to reboot the controller every time you enable or disable IP mobility.
Example
This command enables IP mobility:
(host) (config) #router mobile
Command History
Release
Modification
ArubaOS 3.0 Command introduced
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers