Release Notes

router ospf
router ospf
aggregate-route rapng-vpn <addr>
area <area-id>
default-cost <cost>
nssa [default-information no-redistribution | no-summary]
stub [no-summary]
default-information originate always
redistribute
loopback
rapng-vpn
vlan [<vlan-ids> | add <vlan-ids> | remove <vlan-ids>]
router-id <rtr-id>
subnet exclude <addr> <mask>
Description
Global OSPF configuration for the upstream router.
Syntax
Parameter Description
aggregate-route
Enter the aggregate route information.
area <area-id>
Enter the keyword area followed by the area identification, in
dotted decimal format, to configure an OSPF area.
default-cost <cost>
Set the summary cost of a NSSA/stub area (in route metric)
Range: 0 to 16777215
nssa
Set an area as a NSSA
default-information-originate
Originate Type 7 default into the NSSA area
no-redistribution
Set the NSSA area for no distribution into this NSSA area
no-summary
Do not send summary LSA into this NSSA area
stub [no-summary]
Set an area as a Total Stub Area and optionally do not send
summary LSA into this area
default-information originate always
Control distribution of default information by distributing a
default route.
redistribute
Redistributes the route.
loopback
Redistributes loopback addresses.
rapng-vpn
Redistribute IAP-VPN addresses.
vlan <vlan-ids>
Redistribute the vlan user subnet.
add <vlan-ids>
Add the user VLANs to the list
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide router ospf | 696