Release Notes

711 | show aaa authentication dot1x Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Value
Reauthentication Interval
Interval, in seconds,
between reauthentication
attempts.
Use Server provided Reauthentication Interval
If enabled, 802.1X
authentication will use the
server-provided
reauthentication period.
Multicast Key Rotation Time Interval
Interval, in seconds,
between multicast key
rotations.
Unicast Key Rotation Time Interval
Interval, in seconds,
between unicast key
rotations.
Authentication Server Retry Interval
Server group retry interval,
in seconds.
Authentication Server Retry Count
The number of server group
retries.
Framed MTU
Shows the framed MTU
attribute sent to the
authentication server.
Number of times ID-Requests are retried
Maximum number of times
ID requests are sent to the
client.
Maximum Number of Reauthentication Attempts
Maximum number of
reauthentication attempts.
Maximum number of times Held State can be bypassed
Number of consecutive
authentication failures
which, when reached,
causes the controller to not
respond to authentication
requests from a client while
the controller is in a held
state after the
authentication failure.
Dynamic WEP Key Message Retry Count
Number of times
unicast/multicast EAPOL key
messages are sent to the
client.
Dynamic WEP Key Size
Dynamic WEP key size,
either 40 or 128 bits.
Interval between WPA/WPA2 Key Messages
Interval, in milliseconds,
between each WPA key
exchange. The allowed
range of values is 1000-
5000 msecs, and the default
value is 1000 msecs.