Release Notes

show aaa authentication stateful-ntlm
show aaa authentication stateful-ntlm
Description
This command displays configuration settings for the Stateful NTLM Authentication profile.Issue this
command without the <profile-name> option to display the entire Stateful NTLM Authentication profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
Stateful NTLM authentication configuration information for that profile.
Syntax
Parameter Description
<profile-name>
The name of an existing Stateful NTLM authentication profile.
Usage Guidelines
Issue this command to identify the default role assigned to users who have successfully authenticated using
the NT LAN Manager (NTLM) authentication protocol, the name of the group of windows servers used to
authenticate these users, and the NTLM authentication timeout period, in seconds.
Examples
The output of the example below shows two stateful NTLM authentication profiles, default and
NTLMprofile1, which are each referenced one time by other profiles. the Profile Status columns are blank,
indicating that these profiles are both user-defined. (If a profile is predefined, the value Predefined appears in
the Profile Status column.)
(host) #show aaa authentication stateful-ntlm
Stateful NTLM Authentication Profile List
-----------------------------------------
Name References Profile Status
---- ---------- --------------
default 1
NTLMprofile1 1
Total:2
The following example displays configuration details for the stateful NTLM authentication profile “default”.
(host) #show aaa authentication stateful-ntlm default
Stateful NTLM Authentication Profile "default"
----------------------------------------------
Parameter Value
--------- -----
Default Role guest
Server Group default
Mode Disabled
Timeout 10 sec
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show aaa authentication stateful-ntlm | 722