Release Notes

Parameter Description
Allow client to auto-
upgrade
Enable or disable VIA client to automatically upgrade when an updated version
of the client is available on the controller.
Default: Enabled
VIA tunneled networks A list of network destination (IP address and netmask) that the VIA client will
tunnel through the controller. All other network destinations will be reachable
directly by the VIA client.
Enable split-tunneling
Enable or disable split tunneling.
l If enabled, all traffic to the VIA tunneled networks will go through the
controller and the rest is just bridged directly on the client.
l If disabled, all traffic will flow through the controller.
Default: off
Allow client-side logging Enable or disable client side logging. If enabled, VIA client will collect logs that
can be sent to the support email-address for troubleshooting.
Default: Enabled
VIA Client WLAN profiles A list of VIA client WLAN profiles that needs to be pushed to the client
machines that use Windows Zero Config (WZC) to configure or manage their
wireless networks.
VIA IKEv2 Policy A list of IPsec crypto maps that the VIA client uses to connect to the controller.
These IPsec Crypto Maps are configured in the CLI using the crypto-local
ipsec-map <ipsec-map-name> command.
VIA IKE Policy List of IKE policies that the VIA Client has to use to connect to the controller.
Use Windows Credentials Enable or disable the use of the Windows credentials to login to VIA. If enabled,
the SSO (Single Sign-on) feature can be utilized by remote users to connect to
internal resources.
Default: Enabled
Enable IKEv2 Select this option to enable or disable the use of IKEv2 policies for VIA.
Use Suite B Cryptography Select this option to use Suite B cryptography methods. You must install the
Advanced Cryptography license to use the Suite B cryptography.
IKEv2 Authentication
method
List of all IKEv2 authentication methods.
VIA IPSec V2 Crypto Map List of all IPSec V2 that the VIA client uses to connect to the controller.
VIA IPsec Crypto Map List of IPsec Crypto Map that the VIA client uses to connect to the controller.
These IPsec Crypto Maps are configured in CLI using the crypto-local
ipsec-map <ipsec-map-name> command.
Allow user to save
passwords
Enable or disable users to save passwords entered in VIA.
Default: Enabled
Enable Supplicant If enabled, VIA starts in bSec mode using L2 suite-b cryptography. This option
is disabled by default.
Enable FIPS Module Shows if the VIA(Federal Information Processing Standard) FIPS module is
enabled, so VIA checks for FIPS compliance during startup. This option is
disabled by default.
Auto-Launch Supplicant Select this option to automatically connect to a configured WLAN network.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show aaa authentication via connection-profile | 728