Release Notes

747 | show aaa authentication-server radius Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Enable IPv6 Disabled
NAS IPv6 N/A
Source Interface N/A
Use MD5 Disabled
Use IP address for calling station ID Disabled
Mode Enabled
Lowercase MAC addresses Disabled
MAC address delimiter none
Service-type of FRAMED-USER Disabled
called-station-id macaddr colon disable
The output of this command includes the following information:
Parameter Description
host
IP address of the RADIUS server
Key
Shared secret between the controller and the authentication server.
Auth port
Authentication port on the server.
Acct Port
Accounting port on the server.
Retransmits
Maximum number of retries sent to the server by the controller before the
server is marked as down.
Timeout
Maximum time, in seconds, that the controller waits before timing out the
request and resending it.
NAS ID
Network Access Server (NAS) identifier to use in RADIUS packets.
NAS IP
NAS IP address to send in RADIUS packets. If you do not configure a server-
specific NAS IP, the global NAS IP is used.
Enable IPv6
Shows if the RADIUS server is enabled in IPv6 mode.
NAS IPv6
IPv6 address for the global NAS IP which the controller uses to
communicate with all the RADIUS servers.
Source Interface
The source interface VLAN ID number.
Use MD5
If enabled, the RADIUS server will use a MD5 hash of cleartext password.
Use IP address for call-
ing station ID
If enabled, the RADIUS server will use an IP address instead of a MAC
address for calling station IDs.
Mode
Shows whether this server is Enabled or Disabled.
Lowercase MAC addresses
If this feature is enabled, the server will send MAC addresses in lowercase let-
ters.
MAC address delimiter
The character used as a MAC address delimiter. If no character is specified,
the RADIUS server will use a colon (:) by default.
Service-type of FRAMED-
USER
If this option is enabled, the server sends the service-type as FRAMED-USER
instead of LOGIN-USER. This option is disabled by default