Release Notes

show ap allowed-channels
show ap allowed-channels
ap-name <ap-name>
country-code <country-code> [ap-type <ap-type>]
ip-addr <ip-addr>
Description
This command shows the allowed channels on a specific AP or country code.
Syntax
Parameter Description
ap-name <ap-name>
Name of an AP.
country-code <country-code>
[ap-type <ap-type>]
Specify a country code to display allowed channels for
that country. If you include the optional ap-type <ap-
type> parameter, the output displays allowed channels
for the specified AP type in that country code.
The <ap-type> parameter is the two or three digit
model number of the AP, such as 135 for the W-AP135,
or 225 for the W-AP225. Remote APs, such as the W-
IAP3WN, require that you enter the prefix RAP- before
the model number. If the APmodel number includes an
alphabetic suffix, such as the W-AP175AC, you must
enter the suffix after the model number. Note that this
suffix may be case-sensitive.
<ip-addr>
IP address of an AP, in dotted-decimal format.
Usage Guidelines
Specify the country code for your controller during initial setup. Changing the country code causes the valid
channel lists to be reset to the defaults for that country.
Examples
The output of this example shows all allowed channels for the country code US.
(host)# show ap allowed-channels US
Allowed Channels for Country Code "US"
--------------------------------------
PHY Type Allowed Channels
-------- ----------------
802.11g (indoor) 1 2 3 4 5 6 7 8 9 10 11
802.11a (indoor) 36 40 44 48 149 153 157 161 165
802.11g (outdoor) 1 2 3 4 5 6 7 8 9 10 11
802.11a (outdoor) 149 153 157 161 165
802.11g 40MHz (indoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (indoor) 36-40 44-48 149-153 157-161
802.11g 40MHz (outdoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (outdoor) 149-153 157-161
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap allowed-channels | 858