Release Notes

869 | show ap arm client-match restriction-
table
Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Time since last restriction(sec) Radio Bssid
-------------------------------- -----------
3866 00:1a:1e:89:c0:c0
The output of this command includes the following parameters:
Parameter Description
Client MAC
Displays the MAC address of the client that Client Match is attempting to steer.
Time last restricted
Displays the date and time at which the client was last steered in the vicinity of this
radio.
Restricted(Cur/Last)
A "1" in this field indicates that the client is currently in the process of being steered
to another radio.
PS deauth
Displays if the client is in power save mode when client match is attempting to
steer the client.
Probe(home/scan/bc_
ssid)
Displays the number of probe requests received on home channel, AP scanning,
and SSID broadcast probe.
Auth(home/scan)
Displays the number of probe requests received on home channel and AP scan-
ning for 802.11 authentication frames.
Time since last
restricted
Display the time (in seconds) since the client was last steered in the vicinity of this
radio.
Radio Bssid
Displays the unique hard-wireless MAC address of the AP. A unique BSSID
applies to each frequency— 802.11a and 802.11g—used from the AP.
Related Commands
Use the following command to enable the client match feature
l rf arm-profile client-match
The following commands display additional statistics for the client match feature
l show ap arm client-match probe-report
l show ap arm client-match neighbors
l show ap arm virtual-beacon-report
l show ap arm client-match unsupported
l show ap arm client-match summary
l show ap arm client-match history