Release Notes

895 | show ap association remote Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show ap association remote
show ap association remote [ap-name <ap-name>|ap-group <ap-group>|bssid <bssid>|channel
<channel>|essid <essid>
Description
Display the association table for an individual AP or group of APs in bridge mode.
Syntax
Parameter Description
ap-name <ap-name>
Show AP associations for a specific remote AP.
ap-group <ap-group>
Show AP associations for a specific group of remote APs.
bssid <bssid>
Show the AP associations for an specific AP Basic Service Set Identifier (BSSID).
The Basic Service Set Identifier (BSSID) is usually the AP’s MAC address.
channel <channel>
Show remote AP associations for a specific channel.
essid <essid>
Show remote AP associations for an Extended Service Set Identifier (ESSID). An
Extended Service Set Identifier (ESSID) is a alphanumeric name that uniquely
identifies a wireless network. If the name includes spaces, you must enclose the
ESSID in quotation marks.
Examples
The output of the command below shows the association table for clients in the AP group group1.
show ap association remote ap-group group1
Flags: W: WMM client, A: Active, R: RRM client
PHY Details: HT: High throughput; 20: 20MHz; 40: 40MHz ss: spatial streams
Association Table
-----------------
Name bssid mac auth assoc aid l-int
essid vlan-id tunnel-id phy assoc.time num assoc Flags
---- ----- --- ---- ----- --- ----- ----
- ------- --------- --- ---------- --------- -----
AP71 00:0b:23:c1:d6:11 00:12:6d:03:1c:f1 y y 1 10 t-lab 111 0x108e
a 23s 1 A
Num Clients:1
The output of this command includes the following information:
Column Description
Name
Name of an AP
bssid
The AP Basic Service Set Identifier (BSSID)
mac
MAC address of the AP