Release Notes

Parameter Description
If enabled, the controller
compares whether or not
an AP has more clients than
its neighboring APs on
other channels. If an AP’s
client load is at or over a
predetermined threshold as
compared to its immediate
neighbors, or if a
neighboring Dell AP on
another channel does not
have any clients, load
balancing will be enabled
on that AP. This feature is
disabled by default.
Spectrum Load Balancing mode
Spectrum Load Balancing
Mode allows control over
how to balance clients.
Select one of the following
options
l channel: Channel-
based load-balancing
balances clients across
channels. This is the
default load-balancing
mode
l radio: Radio-based load-
balancing balances
clients across APs
Spectrum load balancing update interval
This value determines how
often spectrum load
balancing calculations are
made (in seconds). The
default value is 30 seconds.
Advertised regulatory max EIRP
A cap for an radio’s
maximum equivalent
isotropic radiated power
(EIRP). Even if the
regulatory approved
maximum for a given
channel is higher than this
EIRP cap, the AP radio using
this profile will advertise
only this capped maximum
EIRP in its radio beacons.
Spectrum load balancing domain
Define a spectrum load
balancing domain to
manually create RF
neighborhoods.
This option creates RF
neighborhood information
for networks that have
disabled Adaptive Radio
Management (ARM)
scanning and channel
assignment.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap config | 918