Release Notes

919 | show ap config Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
l If spectrum load
balancing is enabled in a
802.11a radio profile but
the spectrum load
balancing domain is not
defined, ArubaOS uses
the ARM feature to
calculate RF
neighborhoods.
l If spectrum load
balancing is enabled in a
802.11a radio profile
and a spectrum load
balancing domain isalso
defined, AP radios
belonging to the same
spectrum load balancing
domain will be
considered part of the
same RF neighborhood
for load balancing, and
will not recognize RF
neighborhoods defined
by the ARM feature.
Rx sensitivity tuning based channel reuse
The channel reuse feature
can operate in either of the
following three modes;
static, dynamic or disable.
(This feature is disabled by
default.)
l Static mode: This mode
of operation is a
coverage-based
adaptation of the Clear
Channel Assessment
(CCA) thresholds. In the
static mode of
operation, the CCA is
adjusted according to
the configured
transmission power
level on the AP, so as
the AP transmit power
decreases as the CCA
threshold increases, and
vice versa.
l Dynamic mode: In this
mode, the Clear
Channel Assessment
(CCA) thresholds are
based on channel loads,
and take into account
the location of the
associated clients. When
you set the Channel
Reuse This feature is
automatically enabled
when the wireless
medium around the AP
is busy greater than half