Release Notes

921 | show ap config Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
l Level-4: level 3 and FIR
immunity.
l Level-5: disable PHY
reporting.
Enable CSA
Displays whether or not the
AP has enabled channel
switch announcements
(CSAs) for 802.11h.
CSA Count
Number of channel switch
announcements that must
be sent before the AP will
switch to a new channel.
Management Frame Throttle interval
Average interval that rate
limiting management
frames are sent from this
radio, in seconds. If this
column displays a zero (0)
rate limiting is disabled for
this AP.
Management Frame Throttle Limit
Maximum number of
management frames that
can come from this radio in
each throttle interval.
ARM/WIDS Override
Shows if Adaptive Radio
Management (ARM) and
Wireless IDS functions are
enabled or disabled. If a
radio is configured to
operate in Air Monitor
mode, then these functions
are always enabled,
regardless of this option.
Protection for 802.11b Clients
Displays whether or not
protection for 802.11b
clients is enabled or
disabled.
Maximum Distance
Maximum distance
between a client and an AP
or between a mesh point
and a mesh portal, in
meters. This value is used
to derive ACK and CTS
timeout times. A value of 0
specifies default settings
for this parameter, where
timeouts are only modified
for outdoor mesh radios
which use a distance of
16km.
The upper limit for this
parameter varies,
depending on the 20/40
MHz mode for a 2.4GHz
frequency band radio: