Release Notes

Parameter Description
Mode Aware Arm
Shows if the mode-aware
ARM feature has been
enabled or disabled for this
AP. If enabled, ARM will turn
the AP into an Air Monitors
(AMs) if it detects higher
coverage levels than
necessary. This helps avoid
higher levels of
interference on the WLAN.
Although this setting is
disabled by default, you
may want to enable this
feature if your APs are
deployed in close proximity
(e.g. less than 60 feet
apart).
Scan mode
Identifies the scan mode for
the AP.
l all-reg-domain: The AP
scans channels within all
regulatory domains.
This is the default
setting.
l reg-domain:Limit the
AP scans to just the
regulatory domain for
that AP.
40 MHz intolerance
The specified setting allows
ARM to determine if 40
MHz mode of operation is
allowed on the 5 GHz or 2.4
GHz frequency band only,
on both frequency bands, or
on neither frequency band.
Honor 40 MHz intolerance
Shows if 40 MHz
intolerance is enabled or
disabled. If enabled, the
radio will stop using the 40
MHz channels if the 40 MHz
intolerance indication is
received from another AP
or station.
Legacy station workaround
Shows if interoperability for
misbehaving legacy
stations is enabled or
disabled.
SSID enable
Shows if the SSID is enabled
or disabled
ESSID
Name that uniquely
identifies the Extended
Service Set Identifier (SSID).
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap config | 926