Release Notes

927 | show ap config Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
Encryption
Encryption type used on this
AP.
DTIM Interval
Shows the interval, in
milliseconds, between the
sending of Delivery Traffic
Indication Messages
(DTIMs) in the beacon. This
is the maximum number of
beacon cycles before
unacknowledged network
broadcasts are flushed.
Basic Rates
Lists supported 802.11a
rates, in Mbps, that are
advertised in beacon
frames and probe
responses from this AP.
Transmit Rates
Lists 802.11a rates at which
the AP is allowed to send
data. The actual transmit
rate depends on what the
client is able to handle,
based on information sent
at the time of association
and on the current
error/loss rate of the client.
Station Ageout Time
Time, in seconds, that a
client is allowed to remain
idle before being aged out.
Max Transmit Attempts
Maximum number of
retries allowed for the AP to
send a frame
RTS Threshold
Wireless clients
transmitting frames larger
than this threshold must
issue Request to Send (RTS)
and wait for the AP to
respond with Clear to Send
(CTS). This helps prevent
mid-air collisions for
wireless clients that are not
within wireless peer range
and cannot detect when
other wireless clients are
transmitting.