Release Notes

929 | show ap config Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
902il Compatibility Mode
Shows if 902 il compatibility
mode is enabled or
disabled. (This parameter
only needs to be enabled
for APs with associated
clients using NTT DoCoMo
902iL phones.)
Hide SSID
Shows if the feature to hide
a SSID name in beacon
frames is enabled or
disabled.
Deny_Broadcast Probes
When a client sends a
broadcast probe request
frame to search for all
available SSIDs, this option
controls whether or not the
system responds for this
SSID. When enabled, no
response is sent and clients
have to know the SSID in
order to associate to the
SSID. When disabled, a
probe response frame is
sent for this SSID.
Local Probe Response
Shows if local probe
response is enabled or
disabled on the AP. If this
option is enabled, the AP is
responsible for sending
802.11 probe responses to
wireless clients’ probe
requests. If this option is
disabled, then the controller
sends the 802.11 probe
responses
Disable Probe Retry
If disabled, the AP will not
resend probes if it does not
get a response.
Battery Boost
Shows if the battery boost
feature is enabled or
disabled for the AP. If
enabled, this feature
converts multicast traffic to
unicast before delivery to
the client, thus allowing you
to set a longer DTIM
interval. The longer interval
keeps associated wireless
clients from activating their
radios for multicast
indication and delivery,
leaving them in power-save
mode longer and thus
lengthening battery life