Release Notes

931 | show ap config Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
802.11g Beacon Rate
Sets the beacon rate for
802.11g for APs use a
Distributed Antenna System
(DAS). Using this parameter
in normal operation may
cause connectivity
problems.
802.11a Beacon Rate
Sets the beacon rate for
802.11a for APs use a
Distributed Antenna System
(DAS). Using this parameter
in normal operation may
cause connectivity
problems.
Advertise QBSS Load IE
Shows if the AP has enabled
or disabled the advertising
of QBSS in the load IE.
High throughput enable (SSID)
Shows if the AP has enabled
or disabled the use of its
high-throughput SSID in 40
MHz mode.
40 MHz channel usage
Determines if this high-
throughput SSID allows
high-throughput (802.11n)
stations to associate.
MPDU Aggregation
Shows if the AP has enabled
or disabled MAC protocol
data unit (MDPU)
aggregation.
Max transmitted A-MPDU size
Shows the maximum size,
in bytes, of an A-MPDU that
can be sent on the AP’s
high-throughput SSID.
Max received A-MPDU size
Shows the maximum size,
in bytes, of an Aggregated-
MAC Packet Data Unit (A-
MPDU) that can be received
on the AP’s high-throughput
SSID.
Min MPDU start spacing
Displays the minimum time
between the start of
adjacent MDPUs within an
aggregate MDPU, in
microseconds.
Supported MCS set
Comma-separated list of
Modulation Coding Scheme
(MCS) values or ranges of
values to be supported on
this high-throughput SSID.