Release Notes

933 | show ap config Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
The use of TKIP or WEP for
unicast traffic forces the
use of legacy transmissions
rates. Disabling this mode
prevents the association of
stations using TKIP or WEP
for unicast traffic. This
mode is disabled by default.
Virtual AP enable
Wireless LAN profiles
configure WLANs in the
form of virtual AP profiles.
This parameter shows if the
AP has enabled or disabled
virtual APs.
Allowed band
Shows the band(s) on which
to use the virtual AP:
l a—802.11a band only (5
GHz)
l g—802.11b/g band only
(2.4 GHz)
l all—both 802.11a and
802.11b/g bands (5 GHz
and 2.4 GHz)
VLAN
Shows the VLAN(s) into
which users are placed in
order to obtain an IP
address.
Forward mode
Shows the current forward
mode (tunnel, bridge, split-
tunnel, or decrypt-tunnel)
for the virtual AP.
This parameter controls
whether 802.11 frames are
tunneled to the controller
using generic routing
encapsulation (GRE),
bridged into the local
Ethernet LAN (for remote
APs), or a combination
thereof depending on the
destination (corporate
traffic goes to the
controller, and Internet
access remains local).