Release Notes

973 | show ap debug datapath Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Column Description
gre-type
GRE tunnel type.
deny-bcast
If enabled, the AP will respond to broadcast probe requests. If disabled, the AP
will not respond to these requests.
num-clients
Number of clients currently using the network.
The output of the following command shows datapath tunnel parameters for an AP with the IPv6 address
11:12:11:11::2.
(host) #show ap debug datapath ip6-addr 11:12:11:11::2
Datapath Parameters Table
-------------------------
essid encr-alg client-vlan-id tunnel-id gre-type deny-bcast num-
clients
----- -------- -------------- --------- -------- ---------- ------
-----
i-platform-mobility WPA2 PSK AES 10 0x1000b 0x8300 disable 0
i-platform-mobility WPA2 PSK AES 10 0x1000a 0x8200 disable 1
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers