Release Notes

show ap debug config-msg-history
show ap debug config-msg-history [ap-name <ap-name>|ip-addr <ip-addr>
|ip6-addr <ip6-addr>]
Description
This command shows recent configuration messages sent and received by an AP.
Syntax
Parameter Description
ap-name <ap-name>
Name of the access point.
ip-addr <ip-addr>
IP address of the access point.
ip6-addr <ip6-addr>
IPv6 address of the access point
Examples
The output of this command shows the configuration message history for the AP named "myAP-ap-105."
(host) #show ap debug config-msg-history ap-name myAP-ap-105
Thu Feb 13 06:32:31 2014(1843 secs ago): RCVD REQ type=CONFIG len=206 peer=10.17.160.4 seq_
num=2623 resps_sent=1
04000000C9040000000E050A11A0040452E90ED00400000A3F04000000010400000018040000000002010201020004
0000000102FF02FF02FF02FF0400000005
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap debug config-msg-history | 984