Release Notes

show ap debug radio-event-log status
show ap debug radio-event-log status {ap-name <ap-name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}
Description
Show information about the radio event information captured in packet log files.
Syntax
Parameter Description
ap-name <ap-name>
Show log information for an AP with a specific name.
ip-addr <ip-addr>
Show log information for an AP with a specific IPv4 address by entering its IPv4
address in dotted-decimal format.
ip6-addr <ip6-addr>
Show log information for an AP with a specific IPv6 address by entering its IPv6
address.
Example
Radio Event Logs
----------------
Radio Index Radio's Bssid Radio's Band Event Type Log File Size Status
----------- ------------- ------------ ---------- ------------- ------
0 00:24:6c:bd:65:b0 80211a N/A N/A start
1 00:24:6c:bd:65:a0 80211g N/A N/A stop
The output of this command includes the following information:
Parameter Description
radio Index
Index number of the APradio (0 or 1)
Radio's BSSID
BSSID of the AP radio. This is typically the AP radio's MAC address.
Radio's Band
Band used by the AP radio.
Event Type
Type of events recorded. By default, all supported event types are recorded.
l N/A: The default event type setting, which captures all supported types of
radio events.
l ani Adaptive Noise Immunity control events
l rcfind: Transmission (Tx) control event
l rcupdate: Transmission (Tx) rate update event
l rx: Received (Rx) status register event
l text: Text record event
l tx: Transmission (Tx) control and Tx status register event
Log File Size
Size of the log file. A value of N/A indicates that the packet log feature uses the
default log file size of 3145728 bytes (3MB)
Status
Shows if packet log capture was started or stopped on the APradio.
Related Commands
ap debug radio-event-log
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap debug radio-event-log status | 988