Users Guide

Table Of Contents
Parameter Description
Range: 5-65535 seconds.
Default: 30 seconds.
Authentication Server
Retry Count
Maximum number of authentication requests that are sent to server group.
Range: 0-3 requests.
Default: 2 requests.
Framed MTU Sets the framed Maximum Transmission Unit (MTU) attribute sent to the
authentication server.
Range: 500-1500 bytes.
Default: 1100 bytes.
Number of times ID-
Requests are retried
Maximum number of times ID requests are sent to the client.
Range: 1-10 retries.
Default: 3 retries.
Maximum Number of
Reauthentication
Attempts
Number of times a user can try to log in with wrong credentials after which the
user is blacklisted as a security threat. Set to 0 to disable blacklisting, otherwise
enter a value from 0-5 to blacklist the user after the specified number of failures.
NOTE: If changed from its default value, this option may require a license.
Maximum number of
times Held State can
be bypassed
Number of consecutive authentication failures which, when reached, causes the
controller to not respond to authentication requests from a client while the
controller is in a held state after the authentication failure. Before this number is
reached, the controller responds to authentication requests from the client even
while the controller is in its held state.
(This parameter is applicable when 802.1X authentication is terminated on the
controller, also known as AAA FastConnect.) The allowed range of values for this
parameter is 0-3 failures, and the default value is 0.
Dynamic WEP Key
Message Retry Count
Set the Number of times WPA/WPA2 Key Messages are retried.
Range: 1-5 retries.
Default: 3 retries.
Dynamic WEP Key Size The default dynamic WEP key size is 128 bits, If desired, you can change this
parameter to 40 bits.
Interval between
WPA/WPA2 Key
Messages
Interval, in milliseconds, between each WPA key exchanges.
Range: 1000-5000 ms.
Default: 1000 ms.
Table 68: 802.1x Authentication Profile Basic WebUI Parameters
Dell Networking W-Series ArubaOS 6.4.x | User Guide 802.1X Authentication |
332