Users Guide

Dell PowerConnect W-620 Controller | Installation Guide About the W-620 Controller | 11
Media Eject Button
The W-620 Series is equipped with a media eject button, which allows users to eject a storage device safely and
place the system in standby. When the button is pushed, the storage media device attached to the controller via
USB are unmounted. Printers and EVDO devices are unaffected.
Pushing the media eject button changes the state of the W-620 Series; the table below describes the states and
LED behaviors associated with use of the media eject button.
LED Status Indicators
Table 2 Media Eject Button LED Behavior
Initial State LED State Action Status LED Function
LED Action
Completed
NAS Media
Operational
Green-solid Press and hold media eject
button for 1 to 5 seconds only
Amber-flashing Un-mount NAS media Amber-solid
NAS Media
Unmounted
Amber-solid Press and hold media eject
button for 1 to 5 seconds only
Amber-flashing Mount attached NAS
device, and return to fully
functional operation
Green-solid
Operational Green-solid Press and hold media eject
button for more than 5 seconds
only
Red-flashing Controller goes into
Standby
Red-solid
Operating with NAS
Media un-mounted
Amber-solid Press and hold media eject
button for more than 5 seconds
only
Red-flashing Controller goes into
Standby
Red-solid
Standby Red-solid Press media eject button Amber-flashing Controller wake-up Green-solid
Table 3 W-620 Series LED Status Indicators
LED Label Function Indicator Status
Power POWER Input Power Status Indicator On (Solid Green) Power on
Off No Power
Status STATUS Module Status Indicator On (Solid Green) Device is operational
On (Solid Red) Device failed or is in Standby
On (Solid Amber) Device is loading software
Off No power
10/100/1000Base-T
Port
LNK/ACT Link/Activity Status Indicator On (Solid Green) Link has been established
On (Flashing Green) Port is transmitting or receiving
data
Off No link on port
1000 Interface Speed On (Solid Green) 1000 Mbps
Off 10/100 Mbps
10/100Base-T Ports LINK/ACT Link/Activity Status Indicator On (Solid Green) Link has been established
On (Flashing Green) Port is transmitting or receiving
data
Off No link on port