Administrator Guide

445 | Roles and Policies Dell Networking W-Series ArubaOS 6.4.x| User Guide
User Roles
User roles are comprised of user role settings, firewall policies, and bandwidth contracts. This section describes
the procedure to create a new user role, and associate a firewall policy with that role.
This section describes how to create a new user role. When you create a user role, you must specify one or
more firewall policies for the role.
In the WebUI
1. Navigate to the Configuration > Security > Access Control > User Roles page.
2. Click Add to create and configure a new user role.
3. Enter a user role name.
4. Under Firewall Policies, click Add.
5. Select one of the following three options to add a policy to the role.
l To use an associate an existing policy to the user role, select Choose from Configured Policies then
select an existing policy from the drop-down list.
l to create a new policy based upon the settings of an existing policy, select Create New Policy from
Existing Policy drop-down list, then select an existing policy from the drop-down list. The Policies page
appears, allowing you to configure a new firewall policy.
l To create and configure an entirely new policy, select Create New Policy, then click Create. The
Policies page appears, allowing you to configure a new firewall policy.
For more information on creating a firewall policy, see Configuring Firewall Policies on page 438.
6. Click Done to add the policy to the user role.
7. (Optional) If the user role contains more than one firewall policy, use the up and down arrows to assign
priorities to each role. The higher the policy on the list, the higher its priority.
8. In the Misc. Configuration section, enter configuration values as described in Table 83.
9. Click Apply.
10.Next, you must assign the user role to a AAA profile. After assigning the user role you can use the show
reference user-role <role> command to see the profiles that reference this user role.For more
information, see Assigning User Roles on page 447