Administrator Guide

639 | Secure Enterprise Mesh Dell Networking W-Series ArubaOS 6.4.x| User Guide
1. Navigate to the Configuration > Wireless > AP Configuration window. Select either the AP Group or AP
Specific tab.
l If you selected the AP Group tab, click the Edit button by the AP group name with the profile you want
to edit.
l If you selected the AP Specific tab, click the Edit button by the AP with the profile you want to edit.
2. In the Profiles list, expand the Mesh menu, then select Mesh Cluster profile.
3. In the Profile Details window pane, click the Mesh Cluster profile drop-down list and select the name of
the profile you want to edit.
4. Change the desired mesh radio settings as desired. Table 128 describes the parameters you can configure in
the mesh high-throughput SSID profile.
A mesh cluster profile configured with wpa2-psk-aes encryption must have a defined WPA hexkey or a WPA
passphrase (or both). If you have configured one encryption type but not the other, and want switch from a hexkey to
a passphrase or vice versa, you must add the new encryption type, click Apply, then remove the encryption type you
no longer want and click Apply again. You cannot delete one encryption type and add a different type in a single
step.
5. Click Apply to save your changes.
Deleting a Mesh Cluster Profile
You can delete a mesh cluster profile only if no APs or AP groups are associated with that profile.
1. Navigate to the Configuration > Advanced Services> All Profiles window.
2. Expand the Mesh menu, then select Mesh Cluster profile. A list of high-throughput SSID profiles appears
in the Profile Details window pane.
3. Click the Delete button by the name of the profile you want to delete.
Managing Mesh Cluster Profiles in the CLI
You must be in config mode to create, modify or delete a mesh cluster profile using the CLI. Specify an existing
mesh cluster profile with the <profile-name> parameter to modify an existing profile, or enter a new name to
create an entirely new profile.
Configuration details and any default values for each of these parameters are described in Table 126. If you do
not specify a parameter for a new profile, that profile uses the default value for that parameter.
Use the no option before any parameter to remove the current value for that parameter and return it to its
default setting. Enter exit to leave the mesh cluster profile mode.
(host)(config) #ap mesh-cluster-profile <profile>
clone <profile>
cluster <name>
no ...
opmode [opensystem | wpa2-psk-aes]
rf-band {a | g}
wpa-hexkey <wpa-hexkey>
wpa-passphrase <wpa-passphrase>
The following examples create and configure the mesh cluster profiles cluster1 and cluster2.
(host)(config) #ap mesh-cluster-profile cluster1
cluster corporate
opmode wpa2-psk-aes
wpa-passphrase mesh_123
rf-band a
(host)(config) #ap mesh-cluster-profile cluster2