Deployment Guide

Dell Networking W-7010 Controller | Installation Guide Installation | 23
Removing an SFP
To remove an SFP module:
1. Open and release the latch on the SFP module.
2. Pull and remove the module from the port.
Connecting an LC Fiber Optic Cable
To connect an LC fiber optic cable into an SFP-SX or SFP-LX module:
1. Clean the fiber optic cable connector before inserting it into the SFP module.
2. Insert the fiber optic cable into the SFP module. Ensure that the latch on the cable faces the top of the SFP
module (see Figure 13).
3. Slide the cable into place until a connection is made and an audible click is heard.
Disconnecting an LC Fiber Optic Cable
To disconnect an LC fiber optic cable from an SFP-SX or SFP-LX module:
1. Depress the transceiver handle to release the latch on the cable and simultaneously pull the cable out of the
port.
Figure 13 Connecting/Disconnecting an LC Fiber Optic Cable