Deployment Guide

Dell Networking W-7010 Controller | Installation Guide Specifications, Safety, and Compliance | 25
Chapter 3
Specifications, Safety, and Compliance
W-7010 Specifications
Physical
 Device Dimensions (without mounting brackets) (HxWxD): 1.74” x 12.75” x 13.0” (4.42 cm x 31.75 cm x
33.0 cm)
 Device Weight: 7.4 lbs (3.4 kg)
Power Supply Specifications
 225W AC Power Supply
 AC Input Voltage: 100 VAC to 240 VAC
 AC Input Current: 3.5 A max.
 AC Input Frequency: 50 to 60 Hz
Operating Specifications
 Operating Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
 Operating Humidity Range: 5% to 95% (RH), non-condensing
Storage Specifications
 Storage Temperature Range: 0 °C to 50 °C (32 °F to 122 °F)
 Storage Humidity Range: 5% to 95% (RH), non-condensing
Safety and Regulatory Compliance
This product complies with 21 CFR Chapter 1, Subchapter J, Part 1040.10, and IEC 60825-1: 1993, A1: 1997, A2:
2001, IEC 60825-2: 2004+A1.
NOTE: For country specific restrictions and additional safety and regulatory information, refer to the multi-language Dell
Networking W-Series Safety, Environmental, and Regulatory Information document included with this product.
CAUTION: Dell controllers must be installed by a professional installer. The professional installer is responsible for ensuring that
grounding is available and it meets applicable local and national electrical codes.
CLASS 1
LASER PRODUCT
CAUTION: Use of controls or adjustments of performance or procedures other than those specified in this manual may result in
hazardous radiation exposure.