Administrator Guide

1048 | AirGroup Dell Networking W-Series ArubaOS 6.4.x| User Guide
Enabling or Disabling mDNS and DLNA
You can enable and disable mDNS and DLNA using CLI commands and WebUI.
In the CLI
Use the following command to enable or disable the mDNS or DLNA for an AirGroup service:
airgroup [mdns|dlna] enable|disable
Both mDNS and DLNA are disabled by default.
Use the following command to view the status of mDNS and DLNA features:
#show airgroup status
Viewing AirGroup Global Setting on Controller
In the WebUI
To view the global setting of AirGroup in the controller WebUI:
1. Navigate to Configuration > Advanced Services > AirGroup.
2. Select the AirGroup Settings tab to view the AirGroup Global Setting in the controller.
In the CLI
Use the following command to view the global settings of the AirGroup configuration and AirGroup services
configured in your WLAN controller.
(host) #show airgroup status
For more information, see Dell Networking W-Series ArubaOS 6.4 Command-Line Interface Reference Guide.
Defining an AirGroup Service
The AirGroup solution defines the concept of configurable AirGroup services. One or more mDNS and DLNA
services can be configured on the controller. When you define an mDNS service as an AirGroup service, you can
implement policies to restrict its availability to a specific user role or VLAN.
The following services are preconfigured and available as part of the factory default configuration:
l AirPlay
l AirPrint
l iTunes
l RemoteMgmt
l Sharing
l Chat
l GoogleCast
l DIAL
l DLNA Media
l DLNA Print
In the WebUI
An administrator can configure and use up to 100 AirGroup services, and each AirGroup service can support up
to 100 service elements. To define an AirGroup service using the controller WebUI:
1. Navigate to Configuration > Advanced Services > AirGroup.
2. On the AirGroup service details tab, click Add New.