Deployment Guide

12 | Installation Dell Networking W-7030 Controller | Installation Guide
2. Pull the AC power cord from the power supply module.
3. The W-7030 controller is now turned Off.
Installing an SFP
To install an SFP module in the W-7030 controller:
1. Slide the SFP module into a dual media port until a connection is made and an audible click is heard (see
Figure 6).
Figure 6 Installing an SFP
Removing an SFP
To remove an SFP module from the W-7030 controller:
1. Open and release the latch on the SFP module.
2. Pull and remove the module from the port.
Connecting an LC Fiber Optic Cable
To connect an LC fiber optic cable to an SFP module:
1. Clean the fiber optic cable connector before inserting it into the SFP module.
2. Insert the fiber optic cable into the SFP module. Ensure that the latch on the cable faces the top of the SFP
module.
3. Slide the cable into place until a connection is made and an audible click is heard.
NOTE: Use standard ESD precautions when installing or removing an SFP.
MENU
ENTER
POWER
STATUS
PEERED
7
5
7
6
4
6
STATACT
LINK/
ST
AT
CONSOLE
5
4
ACT
LINK/
STAT