Installation manual

Dell PowerConnect W-7200 Series Controller | Installation Guide Installation | 23
3. Repeat these steps on the opposite side of the controller.
Figure 10 Rack Mount Brackets
4. Mount the controller within your organization’s rack system using four (two per bracket) M6 x 15mm phillips
flat head screws and suitable screwdriver (see Figure 11).
Figure 11 Rack Mount Installation
5. Leave a minimum of four inches (10cm) of space on the left and right side of the unit for proper air flow and
ventilation. See Figure 8 on page 17 for more information about the W-7200’s airflow requirements.
7200_08
7200_08a