Users Guide

Dell PowerConnect W-AirWave | User Guide Discovering, Adding, and Managing Devices | 113
 Privacy Password
 SNMPv3 Username
 Telnet Username
 Telnet Password
 Enable Password
 SNMP Port
You can download a CSV file and customize it as you like. A sample CSV file is illustrated in Figure 74.
Figure 74 Sample CSV File
1. To import a CSV file, go to the Device Setup > Add page.
2. Select the Import Devices via CSV link. The Upload a list of devices page displays; see Figure 75.
Figure 75 Device Setup > Add > Import Devices via CSV Page Illustration
3. Select a group and folder into which to import the list of devices.
4. Select Choose File and select the CSV list file on your computer.
5. Select Upload to add the list of devices into AMP.
Adding Universal Devices
AMP gets basic monitoring information from any device including switches, routers and APs whether or not they
are supported devices. Entering SNMP credentials is optional. If no SNMP credentials are entered, AMP will
provide ICMP monitoring of universal devices. This allows you to monitor key elements of the wired network
infrastructure, including upstream switches, RADIUS servers and other devices. While AMP can manage most
leading brands and models of wireless infrastructure, universal device support also enables basic monitoring of
many of the less commonly used devices.
Perform the same steps to add universal devices to AMP that were detailed in “Adding Devices with the Device
Setup > Add Page” on page110.
AMP collects basic information about universal devices including name, contact, uptime and location. Once you
have added a universal device, you can view a list of its interfaces on APs/Devices > Manage.
By selecting the pencil icon next to an interface, you can assign it to be non-monitored or monitored as Interface
1 or 2. AMP collects this information and displays it on the APs/Devices > Monitor page in the Interface section.