Users Guide

Dell PowerConnect W-AirWave | User Guide Creating and Using Templates | 147
Chapter 6
Creating and Using Templates
This chapter provides an overview and several tasks supporting the use of device configuration templates in AMP,
and contains the following topics:
 “Group Templates” on page147
 “Viewing and Adding Templates” on page148
 “Configuring General Template Files and Variables” on page151
 “Configuring Cisco IOS Templates” on page156
 “Configuring Cisco Catalyst Switch Templates” on page158
 “Configuring Symbol Controller / HP WESM Templates” on page158
 “Configuring a Global Template” on page160
Group Templates
Supported Device Templates
Templates are helpful configuration tools that allow AMP to manage virtually all device settings. A template uses
variables to adjust for minor configuration differences between devices.
The Groups > Templates configuration page allows you to create configuration templates for the following types
of devices:
 Dell PowerConnect W
 Aruba
 Alcatel-Lucent
 Cisco Aironet IOS autonomous APs
 Cisco Catalyst switches
 HP ProCurve 530 and WeSM controllers
 Nomadix
 Symbol
 Trapeze
 3Com
 Nortel
 Enterasys
Template Variables
Variables in templates configure device-specific properties, such as name, IP address and channel. Variables can
also be used to configure group-level properties, such as SSID and RADIUS server, which may differ from one
group to the next.
The AMP template understands many variables including the following:
 %ap_include_1% through %ap_include_10%
 %channel%