Users Guide

Dell PowerConnect W-AirWave | User Guide Performing Daily Administration in AirWave | 219
is required to view the public portal. The Public Portal can be enabled in AMP Setup > General in the Master
Console section. Once enabled, a new Portal tab will appear to the right of the Groups tab (refer to the
navigation section in Figure 159 in the previous page). The URL of the public portal will be https://
your.AMP.name/public. When you upgrade to the latest version of AMP, the public portal is disabled by default,
regardless of the type of license.
Figure 160 Public Portal Page Illustration
The Public Portal supports configuration of the iPhone interface. This can be configured using the Master
Console AMP page. See “Defining General AMP Server Settings” on page35.
Adding a Managed AMP with the Master Console
Perform the following steps to add a managed AMP console.
1. Navigate to the Home > Managed AMPs page.
2. Select the pencil icon to edit or reconfigure an existing AMP console, or select Add New Managed AMP to
create a new AMP console. The Managed AMP page appears. Complete the settings on this page as described
in Table 123.
Table 123 Managed AMP Fields and Default Values
Field Default Description
Hostname / IP Address N/A Enter the IP address or Hostname of the AMP server to be managed.
Polling Enabled Yes Enables or disables the Master Console polling of managed AMP server.
Polling Period 5 minutes Determines how frequently the Master Console polls the managed AMP server.
Username N/A The username used by the Master Console to login to the managed AMP server. The
user needs to be an AP/Device Manager or AMP Administrator.
Password
(Confirm Password)
N/A The password used by the Master Console to login to the managed AMP.
HTTP Timeout
(5-1000 sec)
60 Defines the timeout period used when polling the managed AMP server.
Manage Group
Configuration
No Defines whether the Master Console can manage device groups on the managed
AMP server.