Users Guide

Dell PowerConnect W-AirWave | User Guide Installing and Getting Started in AirWave | 23
Navigation Section
The Navigation Section displays tabs for all main UI pages within AirWave. The top bar is a static navigation bar
containing tabs for the main components of AirWave, while the lower bar is context-sensitive and displays the
subtabs for the highlighted tab.
Table 6 Components and Subtabs of AirWave Navigation
Main Tab Description Subtabs
Home The Home tab provides basic AirWave information including system
name, host name, IP address, current time, running time, and software
version.
The Home page also provides a central point for network status
information and monitoring tools, giving graphical display of network
activity, and links to many of the most frequent tools in AirWave. For
additional information, refer to “Monitoring and Supporting AMP with the
Home Pages” on page206.
 Overview
 Search
 Documentation
 License
 User Info
Helpdesk The Helpdesk pages provide an interface for support and diagnostic tools.
For additional information refer to Chapter 10, “Using the AMP Helpdesk”
on page253.
 Incidents
 Setup
Groups The Groups pages provide information on the logical "groups" of devices
that have been established for efficient monitoring and configuration. For
additional information, see Chapter 4, “Configuring and Using Device
Groups in AMP” on page69.
NOTE: Some of the focused subtabs will not appear for all groups.
Focused subtabs are visible based on the device type field on the Groups
> Basic page. This subtab is the first page to appear when adding or
editing groups.
NOTE: When individual device configurations are specified, device-level
settings override the Group-level settings to which a device belongs.
 List
 Focused Subtabs
 Monitor
 Basic
 Templates
 Security
 SSIDs
 AAA Servers
 Radio
 Dell PowerConnect W
Config
 Cisco WLC Config
 PTMP
 Proxim Mesh
 MAC ACL
 Firmware
 Compare
APs/Devices The APs/Devices pages provide detailed information about all authorized
APs and wireless LAN switches or controllers on the network, including
all configuration and current monitoring data.
These pages interact with several additional pages in AirWave. Refer to
Chapter 5, “Discovering, Adding, and Managing Devices” on page105.
NOTE: When specified, device-level settings override the default Group-
level settings.
 List
 New
 Up
 Down
 Mismatched
 Ignored
 Focused Subtabs
 Monitor
 Manage
 Interfaces
 Audit
 Compliance
 Containment Status
Users The Users pages provide detailed information about all client devices and
users currently associated to the WLAN. For additional information, refer
to “Monitoring and Supporting WLAN Users” on page191.
 Connected
 All
 Guest Users
 User Detail
 Diagnostics
 Tags