Users Guide

274 | Using VisualRF Dell PowerConnect W-AirWave |Version 7.3
Figure 210 Provisioning Devices
Wired devices that are added to an IDF are included in any BOM report covering that floor.
Viewing Port Status on Deployed Switches
Deployed switches on a rack will display the port status as red (down) and green (up) interface icons, which
corresponds with the operationally up devices on the APs/Devices > Interfaces list. Planned switches do not
display these status indicators in VisualRF.
Figure 211 Deployed switch showing red and green port status icons
Fine-Tuning Location Service in VisualRF > Setup
There are several options on the VisualRF > Setup page which increase client location accuracy. All of these
items will increase the processing requirements for the location service and could negatively impact the overall
performance of AMP.
 Grid Size - decreasing the grid size will enable the location to place clients in a small grid which will increase
accuracy. You can right-click on a floor plan within a building view and change this setting.