Users Guide

276 | Using VisualRF Dell PowerConnect W-AirWave |Version 7.3
 For square or rectangular floor plans ensure access points are deployed on the exterior walls of each floor with
access points in the middle as well. Refer to Figure 215 for an example.
Figure 215 Rectangular Floor Plan AP Deployment
Using QuickView to Assess RF Environments
QuickView has four distinct views or entry points: client view, access point view, floor plan view, and network,
campus, and building view.
This section contains the following corresponding topics:
 “Viewing a Wireless User's RF Environment” on page276
 “Viewing an AP’s Wireless RF Environment” on page278
 “Viewing a Floor Plan’s RF Environment” on page279
 “Viewing a Network, Campus, Building’s RF Environment” on page280
Viewing a Wireless User's RF Environment
1. Navigate to Users > List in AMP.
2. Click the link under the Location column for the user of interest, as shown in Figure 216. A QuickView
window of that location opens and indicates the client with a Username label, as shown in Figure 217:
Figure 216 Link to user’s thumbnail (the Location column)
Figure 217 QuickView of the selected device