Users Guide

288 | Using VisualRF Dell PowerConnect W-AirWave |Version 7.3
Figure 234 Autoprovision APs Window Illustration
5. When you’re finished selecting the desired options, select OK.
Tweaking a Planning Region
If the planning layout does not meet your expectations, you can edit by right-clicking within the region to see the
following options:
 Delete Planned APs in the Region - deletes only provisioned APs in the region
 Reprovision APs - remove all planned APs inside this region and prompts for new information to replan the
region
 Delete the Region - deletes the region and all planned APs
 Edit the region - change the name of the region
Plan By Section
Coverage Coverage by Data Rate or Signal.
Location Plan for location accuracy. This mode will result in additional APs placed near the edge of the region
to aid in location calculation.
Number of APs Number of APs to place in the planning region.
Other Section
Plan Sensors Whether to plan sensors into the region.
Save Region as Walls Whether to save the edges of the planning region as walls.
Update Environment
and Data Rate
Whether to update the environment and data rate in case of changes.
Table 155 Fields in the Autoprovision APs Window (Continued)
Field Description