Users Guide

Dell PowerConnect W-AirWave |User Guide Using VisualRF | 289
 Copy the Region to floors above - will copy the region and auto plan for floors above.
To replicate a floor plan, follow these steps:
1. Navigate back to the Building view by clicking on the navigation tags in the bottom-right corner of the
window.
2. Right-click the floor and select Duplicate.
3. Enter the following information:
 Starting and ending floors
 Select the toggles to copy walls, regions, data rates, and AP placement
4. Select OK to save your changes.
5. Manually refresh page and your is redirected to the VisualRF > Floor Plan page. The Building view will
reflect the new floors.
Printing a Bill of Materials Report
You can generate a Bill of Materials (BOM) Report from within VisualRF in Word format. Follow these steps:
1. Navigate back to the Network view.
2. Right select Campus icon and select Show Bill of Materials. A generating report popup appears.
3. Select options such as heatmap, data rate, sensor coverage, wired range, and summary.
4. Select OK. A BOM report appears in Microsoft Word as illustrated in Figure 235:
Figure 235 Bill of Materials Report Illustration (partial view)
NOTE: The starting floor will add one to the highest floor in the building and the ending floor defaults to 10 more than the starting
floor.
NOTE: The starting floor will add one to the highest floor in the building and the ending floor defaults to 10 more than the starting
floor.
NOTE: You should see all replicate floors with matching number of access points.