Users Guide

300 | Setting Up Dell PowerConnect W-Instant in AirWave Dell PowerConnect W-AirWave | User Guide
APs/Devices > Monitor > Radio Statistics
The Radio Statistics page for Dell PowerConnect W-Instant devices displays CPU Utilization, Channel
Utilization, Bandwidth, Power, and MAC/Phy Error statistics.
RAPIDS
Since Dell PowerConnect W-Instant does not support mitigation or high-level rogue reporting, it does not
synchronize classification. All rogue devices are reported and stored in the AMP for evaluation based on high-level
rule sets.
Dell PowerConnect W-Instant currently does not match wireless BSSIDs to local MAC addresses within an IAP's
ARP table.
Dell PowerConnect W-Instant does not currently support IDS event notification.
Reports
Dell PowerConnect W-Instant Virtual Controllers appear as a separate device in the Device Inventory Report and
most other reports that list devices.
Other Available Features
Firmware Image Management
AMP pushes firmware to the Dell PowerConnect W-Instant Virtual Controller, and the Virtual Controller pushes
the firmware to the rest of its IAPs. When using AMP to manage IAPs, you can upgrade the firmware by loading
the firmware onto AMP and then scheduling an upgrade from AMP.
Intrusion Detection System
AMP automatically detects rogue IAPs irrespective of their location in the network. It prevents authorized IAPs
from being detected as rogue IAPs, and tracks and correlates the IDS events to provide a comprehensive picture
of your network's security.
NOTE: AMP does not provide a Device Uptime report for Dell PowerConnect W-Instant devices.